James Lizotte, Chair
The instruction for the three A.A.S. degree programs and four
certificate programs of the Industrial Technology Department is
delivered at the West Campus, 3639 South Avenue West.
Special Certificate and Degree Requirements
The related studies requirements are included in the following
courses of study. Refer to the Academic Policies and Procedures
section of this catalog for the specific requirements.
Course Fees, Tools, and Supplies
All programs in the Industrial Technology Department include
courses with course fees and special tools and supplies requirements.
To obtain a complete listing of these additional items and costs,
call the College of Technology Admissions Office at 406-243 7882.
Building
Maintenance-Certificate
Students in the Building Maintenance program are trained as
building maintenance personnel who take care of commercial buildings
including plumbing, painting, electrical work, carpentry, heating
and air conditioning, troubleshooting, welding, and more. While
in school, students study the physical and electrical theory that
allows understanding of building systems. In addition, they study
preventive maintenance, building cleaning, roofing and flooring
repair, lawn care and pruning techniques, and swimming pool and
boiler system water treatment. Most courses are half-semester
in length.
Students are awarded a Certificate of Completion upon successfully
completing the program.
The Building Maintenance program satisfies the requirements for
the first year of the Building Maintenance Engineering program.
*Autumn Entry
BME 120T 121T Electricity I, II |
3 |
3 |
BME 124T 125T Construction Basics I, II |
|
|
BME 126T Ancillary Services |
|
|
BME 129T Heating and Air Conditioning I |
|
|
BME 195T Special Topics |
|
|
MAT 110T Industrial Math |
|
|
MPR 115T Related Metals Processes |
|
|
PSY 105T Work Attitudes |
|
|
SCN 117T Physical Science |
- |
4 |
Total |
|
|
*Spring entry allowed with program director's consent.
Building
Maintenance Engineering A.A.S. Degree
Students in the Building Maintenance Engineering program train
to be building maintenance personnel who take care of commercial
buildings including plumbing, painting, electrical work, carpentry,
heating and air conditioning, troubleshooting, welding and more.
While in school, they study the physical and electrical theory
that allows understanding of building systems. In addition, they
study preventive maintenance, building cleaning, roofing and flooring
repair, interior wall repair, lawn care and pruning techniques,
and swimming pool and boiler system water treatment. Students
learn how a building is constructed and how to maintain control
systems. Heating and air conditioning systems are studied in depth.
They learn the rules and regulations of building codes and specifications
and how to read blueprints. They gain related skills needed on
the job such as familiarity with data processing and the use of
computers, communication skills, and personnel supervision and
management. Most courses are half-semester in length.
The Associate of Applied Science degree is awarded upon successful
completion of the program.
*Autumn Entry:
First Year |
Autumn |
Spring |
BME 120T 121T Electricity I, II |
|
|
BME 124T 125T Construction Basics I, II |
|
|
BME 126T Ancillary Services |
|
|
BME 129T Heating and Air Conditioning I |
|
|
BME 195T Special Topics |
|
|
MAT 110T Industrial Math |
|
|
MPR 115T Related Metals Processes |
|
|
PSY 105T Work Attitudes |
- |
1 |
SCN 117T Physical Science |
|
|
Total |
|
|
Second Year |
|
|
BME 221T Blueprint Reading |
|
|
BME 222T Building Construction |
|
|
BME 223T Basic Motors and Controls |
|
|
BME 224T Pumps and Piping |
- |
2 |
BME 227T HVAC Control Systems |
|
|
BME 228T Machine and Equipment Installation |
|
|
BME 229T Heating and Air Conditioning II |
5 |
- |
BME 230T Preventive Maintenance |
1 |
- |
BUS 242T Supervision |
- |
3 |
COM 115 Technical Writing |
- |
3 |
CRT 101 Introduction to Computers |
2 |
- |
SCN 118T General Physics |
3 |
- |
Total |
16 |
16 |
*Spring entry allowed with program director's consent.
Diesel
Technology A.A.S. Degree
Students in the Diesel Technology program train to be diesel
mechanics who repair diesel powered trucks and heavy equipment.
Students study hydraulics, electrical systems, fuel systems, power
trains, air conditioning, brakes and suspension, engine theory,
and engine diagnosis, beginning with basic principles and proceeding
to an advanced level of system technology. Along with these core
courses, students take classes in welding, machining, computers,
physics, and business technology.
Students who complete the program successfully are awarded the
Associate of Applied Science degree.
Credit for independent study is available to those desiring additional
instruction in diesel mechanics. Contact the program director,
Jim Headlee, at 406-243 7648 for more information.
*Autumn Entry:
First Year |
Autumn |
Spring |
COM 115 Technical Writing |
|
|
CRT 101 Introduction to Computers |
|
|
DET 120T Electrical Systems |
|
|
DET 128T Engine Service I |
|
|
DET 135T Power Trains |
|
|
MAT 110T Industrial Math |
|
|
MPR 115T Related Metals Processes |
|
|
PSY 110S Organizational Psychology |
|
|
WEL 111T Welding |
|
|
Total |
|
|
Second Year |
|
|
DET 221T Brakes, Suspension, and Undercarriage |
|
|
DET 225T Hydraulics |
|
|
DET 229T Engine Service II |
|
|
DET 230T Air Conditioning |
- |
3 |
DET 231T Fuel Systems |
|
|
DET 235T Advanced Power Trains |
|
|
SCN 118T General Physics |
3 |
- |
TRK 106T Commercial Driver's License (CDL)
Training (not offered every semester) |
- |
1 |
WEL 139T Welding Maintenance and Repair |
2 |
- |
Total |
19 |
17-18 |
*Spring entry allowed with program director's consent.
Heavy
Equipment Operation Certificate
Students in the Heavy Equipment Operation program are trained
to safely and properly operate and maintain a variety of heavy
equipment. They learn to operate equipment including crawler tractors,
graders, scrapers, front end loaders, excavators, backhoes, and
dump trucks. Students develop an understanding of basic surveying
techniques, receive extensive training in safety regulations and
procedures, and learn how to handle controls precisely and judge
distances accurately.
A Certificate of Completion is awarded after the program is successfully
completed.
The program often has a waiting list for admittance. Interested
persons are encouraged to apply one year prior to anticipated
school attendance.
Autumn Entry:
|
Autumn |
Spring |
HEO 140T Basic Surveying |
|
|
HEO 142T Basic Surveying II |
|
|
HEO 146T Safety and Basic Controls |
|
|
HEO 148T Operational Skill Building |
|
|
HEO 150T Job Simulation |
|
|
HEO 151T Service and Maintenance |
|
|
HEO 153T Construction Theory and Specialized
Equipment |
|
|
MAT 110T Industrial Math |
|
|
MPR 112T Related Metals Processes |
|
|
PSY 105T Work Attitudes |
|
|
TRK 106T Commercial Truck Driving License Training (no
offered every semester) |
|
|
WEL 111T Welding |
|
|
Total |
|
|
Recreational
Power Equipment Certificate
Students in the program are trained to be recreational power
equipment technicians who repair and maintain a wide variety of
2-stroke and 4-stroke cycle engines and related equipment. Students
work on motorcycles, ATVs, snowmobiles, outboard motors, and personal
watercraft. Units of instruction include mechanical, fuel, and
electrical systems.
For more detailed information including program costs, tool requirements,
student class schedules, and course syllabi, visit the RPE web
site at: www.cte.umt.edu/Department/IndTech/rpe/default.asp
Students are awarded a Certificate of Completion upon successful
completion of the program. Spring entry allowed with program director
consent.
Credit for independent study is available to those desiring additional
instruction in recreational power equipment.
Contact the program director, Jim Lizotte, at 406-243 7642 or
jim.lizotte@mso.umt.edu
for more information.
Autumn Entry:
|
Autumn |
Spring |
CRT 101 Introduction to Computers |
|
|
MAT 110T Industrial Math |
|
|
MPR 115T Related Metals Processes |
|
|
PSY 105T Work Attitudes |
|
|
SET 160T Basic Electricity |
|
|
SET 176T Motorcycle/ATV Engines, Suspension, and Chassis |
|
|
SET 177T Motorcycle/ATV Electrical and Fuel
Systems |
|
|
SET 178T Marine Electrical and Fuel Systems |
|
|
SET 179T Marine Powerheads and Lower Units |
|
|
SET 180T Snowmobile Maintenance and Repair I |
|
|
SET 181T Snowmobile Maintenance and Repair II |
|
|
SET 182T Computer Applications for Motor Sports |
|
|
Total |
|
|
Welding
Technology - Certificate and A.A.S. Degree
Students in the Welding Technology program study welding as
it relates to manufacturing, fabrication, building construction,
and repair and maintenance of equipment and facilities. They learn
to make layouts according to blueprints and specifications. Students
also learn to prepare material prior to welding and to apply proper
filler metal according to national standards and specifications.
Welding students develop skills in six different welding processes--oxyacetylene,
shielded metal arc, gas metal arc, flux core arc, submerged arc,
and gas tungsten arc welding. They study the design and fabrication
of jigs and related fixtures and learn how to test for, inspect,
and repair defective welds. In addition, students study metallurgy
and understand how the heating and cooling cycles of welding affect
the properties of metals.
Welding technology students have the opportunity to become certified
to American Welding Society specifications and receive documentation
stating qualifications.
Students are awarded the Associate of Applied Science degree upon
successfully completing the two-year program. Students who successfully
complete the first year of the program are eligible to receive
a Certificate of Completion.
For more detailed information including program costs, tool lists,
class schedules, and course syllabi, visit our web site at: www.cte.umt.edu/Department/IndTech/wel/default.asp
Autumn Entry:
First Year |
Autumn |
Spring |
CRT 101 Introduction to Computers |
|
|
MAT 110T Industrial Math |
|
|
MPR 114T Related Metals Processes |
|
|
PSY 105T Work Attitudes |
|
|
WEL 180T Welding Metallurgy |
|
|
WEL 181T Shielded Metal Arc Welding (Plate) and Thermal
Cutting |
|
|
WEL 182T Blueprint Reading and Development |
|
|
WEL 183T Layout Techniques |
|
|
WEL 184T OSHA Rules and Compliance |
|
|
WEL 185T Flux Core Arc Welding |
|
|
WEL 189T Metal Fabrication I |
|
|
Total |
|
|
Successful completion of the courses listed above result in
the award of a Certificate of Completion in Welding.
Second Year |
Autumn |
Spring |
BUS 242T Supervision |
|
|
COM 115 Technical Writing |
|
|
MPR 214T Advanced Related Metals Processes |
|
|
WEL 195T Special Topics |
|
|
WEL 280T Gas Tungsten Arc Welding |
|
|
WEL 281T Metal Fabrication II |
|
|
WEL 282T Pipe Welding-SMAW and GTAW |
|
|
WEL 283T Gas Metal Arc Welding |
|
|
WEL 285T Automation in Welding |
|
|
WEL 286T Welding Certification and Codes |
|
|
Total |
|
|
Courses
U = for undergraduate credit only. R after the credit indicates
the course may be repeated for credit to the maximum indicated
after the R.
Building Maintenance Engineering (BME)
U 120T Electricity I 3 cr. Offered autumn.
The electrical laws and principles pertaining to DC and AC circuits.
Includes current, voltage, resistance, power, inductance, capacitance,
and transformers. Introduction to wiring methods and materials
in conformance with the National Electric Code (NEC). Includes
installation and replacement of light fixtures, heaters, GFCIs,
switches, receptacles, and electrical thermostats.
U 121T Electricity II 3 cr. Offered spring. Prereq.,
BME 120T. Continuation of wiring methods and materials in conformance
with the National Electric Code (NEC). Presents fundamentals of
mechanical and electrical installations, with emphasis on tool
use and material selection. Includes fundamental 120v single phase
and 240v single and three phase alternating current, design wiring
techniques, advanced lighting principles, generators, and motors.
U 124T Construction Basics I 4 cr. Offered autumn.
Application of plumbing, masonry, roofing, and flooring principles
and the identification and safe uses of associated tools and materials.
U 125T Construction Basics II 3 cr. Offered spring.
Application of carpentry, painting, and glazing principles and
techniques. Emphasis is placed on developing skills commonly used
in maintaining commercial buildings; for example, door hanging,
window glass repair, and installing sheetrock, ceilings, hardware,
paneling, and cabinets.
U 126T Ancillary Services 4 cr. Offered autumn.
Maintenance principles pertaining to lawns, ground covers, trees,
swimming pools, and building cleaning. Emphasis is placed on safe
application of chemicals and maintenance frequency.
U 129T Heating and Air Conditioning I 4 cr. Offered
spring. The fundamentals of heating, ventilating, and air conditioning.
Covers heating and refrigeration cycles, refrigerants, and components
used in associated systems. Introduces the basic mechanical service
procedures used in the industry.
U 221T Blueprint Reading 2 cr. Offered autumn.
The fundamental working drawings used in the trades and crafts.
Emphasizes recognition of various types of drawings and the development
of interpretation skills. Introduction to drafting equipment,
lettering techniques, sketching, basic dimensioning, scale reading,
and geometric construction.
U 222T Building Construction 3 cr. Offered autumn. Prereq.,
BME 125T. The design and construction of foundation, floor, wall,
ceiling, and roof systems. Includes platform and balloon framing,
headers, joists, studs, rafters, sheathing, trusses, and roof
types. Includes an overview of Uniform Building Code.
U 223T Basic Motors and Controls 3 cr. Offered
autumn. Prereq., BME 121T, BME 129T. A survey of the various types
of motors and protective devices. Included are single phase capacitor
start, capacitor start and run, shaded pole tap wound, permanent
split capacitor, and three phase motors. Emphasis is placed on
motor control problems and protective devices.
U 224T Pumps and Piping 2 cr. Offered spring.
Prereq., BME 124T. Overview of the Uniform Plumbing Code. Discussion
of plumbing installation tools, safety, materials, fittings, sizing,
fixtures, and basic design. Covers centrifugal, rotary, reciprocating,
and special service pumps. Includes single and multistage pumps,
cavitation, balancing, bearings, packings, clearances, mechanical
seals, and problem troubleshooting. The piping section covers
hot water, cold water, gas, compressed air, fire protection, waste,
drain, and specialty piping.
U 227T HVAC Control Systems 3 cr. Offered autumn.
Prereq., BME 129T, SCN 117T. Introduction to bimetallic, bourdon
tube, remote bulb, CAB, thermocouple, thermistor, RTD, and thermopile
measuring devices. Temperature and pressure control devices are
related to the operation of heating, ventilating, and air conditioning
equipment. Two position and proportional pneumatic control systems
are presented, as well as pneumatic transmission. Computerized
management systems for energy conservation are discussed.
U 228T Machine and Equipment Installation 2 cr. Offered
spring. Prereq., SCN 117T, SCN 118T. Tools and procedures for
installing, leveling, and aligning equipment and machinery. Mechanical
advantage formulas presented in physics are demonstrated. Included
are safe loads for ropes, jacks, slings, and blocks and tackles.
Skills pertaining to the proper use of ladders, scaffolds, safety
belts, and life nets used in maintenance work are discussed.
U 229T Heating and Air Conditioning II 5 cr. Offered
spring. Prereq., BME 129T. Advanced study of heating, ventilation,
and air conditioning principles. Includes refrigeration process,
heat flow, temperature measurements, gas laws, system evacuation
and charging, cooling towers, and chilled water systems. Includes
overview of Uniform Mechanical Code.
U 230T Preventive Maintenance 1 cr. Offered spring.
Concepts of equipment maintenance to prevent breakdowns and unscheduled
downtime. Includes equipment inspection, maintenance scheduling,
and nondestructive testing methods.
Diesel Equipment Technology (DET)
U 120T Electrical Systems 8 cr. Offered spring.
The theory of AC/DC electricity including Ohm's Law, magnetism,
wiring diagrams, and circuit analysis. Starting, charging, and
related systems are covered in depth using test equipment commonly
found in heavy equipment repair facilities. Electronic systems
are reviewed and tested using common electronic test equipment.
U 128T Engine Service I 4 cr. Offered autumn.
Introduction to the construction and operation of internal combustion
engines with the diesel engine being examined in detail. The use
of measuring tools and related special tools is covered extensively
along with common manufacture rebuild procedures. Start up and
running practices are demonstrated on various running diesel engines.
U 135T Power Trains 7 cr. Offered autumn. Chassis
and drive train components used in light and heavy duty trucks
and other equipment. Clutches, manual transmissions, differentials,
and final drives are covered.
U 196T Independent Study Variable cr. (R-6) Offered
every term.
U 221T Brakes, Suspension, and Undercarriage 6 cr. Offered
autumn. Air brake design, construction, and operating principles
including an in depth study of diagnostic procedures for troubleshooting
and repairing brake systems. Suspension systems and undercarriage
design and repair are covered along with common axle alignment
procedures found in industry.
U 225T Hydraulics 6 cr. Offered autumn. Theory
and application of hydraulics relative to mobile construction
equipment and industrial hydraulic systems. Includes valves, pumps,
motors, actuators, and related hydraulic components, system maintenance,
troubleshooting, and repair.
U 229T Engine Service II 7 cr. Offered spring.
Prereq., DET 128T. A continuation of Engine Service I with a major
emphasis placed on the rebuilding of a diesel engine. Engine components
repair and failure analysis are reviewed along with tune up and
running of diesel engines commonly found in the heavy equipment
trade. Shop flat rate procedures, work order procedures, and warranty
requirements are covered.
U 230T Air Conditioning 3 cr. Offered spring.
Prereq., DET 120T, DET 225T. Principles, theories, and the hazards
of working with R 12 and R 34, including laws governing these
refrigerants. An in depth study of the components of an air conditioning
system including hands on practice. Discharging and charging principles
are discussed, including leakage testing and other general diagnostic
principles found in the field.
U 231T Fuel Systems 5 cr. Offered spring. A comprehensive
study of diesel fuel injection systems to include: Cummins, Roosa
Master, Caterpillar, Detroit Diesel, and Bosch. Disassembly and
repair of these systems are covered in depth along with calibration
practices. Installation, timing, and on engine adjustments are
made on diesel engines. On engine diagnosis of the fuel systems
using special diesel engine diagnostic tools is reviewed.
U 235T Advanced Power Trains 2 cr. Offered spring.
Prereq., DET 135T. A continuation of DET 135T with an emphasis
on heavy automatic transmission, torque converters, and powershift
transmission. In depth coverage of component review troubleshooting
and repair.
Heavy Equipment Operation (HEO)
U 140T Basic Surveying 2 cr. Offered autumn.
Basic principles of surveying and the use of surveying equipment.
Calculation of angles and distances to determine grade elevations.
Introduction to Global Positioning Systems, lasers and their relationship
to the heavy equipment operator.
U 142T Basic Surveying II 1 cr. Offered spring.
Prereq., HEO 140T. Students plan and layout projects undertaken
by the program within the community. The students participate
in staking and controlling the project by using skills acquired
in HEO 140T. Emphasis is on earthwork surveying.
U 146T Safety and Basic Controls 5 cr. Offered
autumn. Orientation to the safe operation and basic control of
crawler tractors, scrapers, front end loaders, motor graders,
backhoes, trucks, and other heavy equipment units. Sufficient
time is allowed for the development of basic machine operational
skills.
U 148T Operational Skill Building 5 cr. Offered
autumn. Prereq., HEO 146T. Advancement of basic skills. Proper
understanding and operation of heavy equipment is pursued. Time
is allowed for development of proper operational techniques.
U 150T Job Simulation 6 cr. Offered spring. Prereq.,
HEO 146T, HEO 148T. Incorporates learned skills into entry level,
industrial situations. Emphasis is on advanced equipment usage,
problem definition and resolution, project type earth moving assignments,
proper equipment, and safety regulations. Course may allow participation
in cooperative project efforts within the community.
U 151T Service and Maintenance 2 cr. Offered autumn.
Different types of lubricants and their applications, scheduled
and preventive maintenance procedures, and importance of periodic
services and maintenance. Also included are safety procedures
and regulations.
U 153T Construction Theory and Specialized Equipment 5
cr. Offered spring. Prereq., MAT 110T. Study of construction
principles, specialized equipment, production estimates, and various
related subjects.
Metals Processes (MPR)
U 112T Related Metals Processes 1 cr. Offered
spring. Use of hand tools and machines which relate to the repair
of heavy equipment. Instruction covers fasteners, layout, bench
metal, threads and threading, drills and drilling, and tool sharpening.
U 114T Related Metals Processes 3 cr. Offered
autumn. Instruction and use of drills, files, threads and threading
processes, basic lathe, drill press, and band saw operation, including
precision measuring instruments. Fasteners, layout procedures,
and basic hand tools are covered.
U 115T Related Metals Processes 3 cr. Offered
autumn and spring. A basic metalworking course covering fasteners,
layout, bench metal, heat treating, threads and threading, drills
and drilling, basic machining, and tool sharpening.
U 214T Advanced Related Metals Processes 3 cr. Offered
autumn. Prereq., MPR 114T or 115T. Advanced skill development
using machine tools such as milling machines, lathes, surface
grinders, and drill presses, emphasizing safety and providing
greater complexity than provided in MPR 114T. Welding and machining
are used together demonstrating how sequencing work improves quality
and productivity.
U 196T Independent Study Variable cr. (R-6) Offered intermittently.
Prereq., consent of instr.
Small Engine Technology (SET)
U 160T Basic Electricity 3 cr. Offered autumn.
The theory of AC/DC electricity including Ohm’s Law, magnetism,
series circuits, parallel circuits, the use of meters, and electrical
test equipment. Includes electrical symbols, soldering, storage
batteries, cranking motors, and electrical safety.
U 176T Motorcycle/ATV Engines, Suspension, and Chassis
3 cr. Offered autumn. Study of the design and function
of several types of engines, transmissions, suspension, and brake
systems.
U 177T Motorcycle/ATV Electrical and Fuel Systems 4 cr.
Offered autumn. Prereq., SET 160T. Principles of ignition, charging,
and cranking systems. Design and function of carburetor, fuel
injection, and lubrication systems. Hands-on diagnosis of problems
and testing of systems.
U 178T Marine Electrical and Fuel Systems 5 cr. Offered
spring. Prereq., SET 160T. Theory of and testing and troubleshooting
of problems with ignition, charging, and cranking systems. Includes
the design, testing, and troubleshooting of marine carburetion
and fuel injection systems.
U 179T Marine Powerheads and Lower Units 6 cr.
Offered spring. Prereq., SET 178T. Theory of design, function
and components of outboard motor powerheads and lower units. Includes
basic rigging, power trim and tilt, propping, and personal watercraft
design, function, and maintenance.
U 180T Snowmobile Maintenance and Repair I 2 cr. Offered
autumn. Prereq., SET 177T. The repair and maintenance of air cooled
and liquid cooled engines. Includes clutch, track, and rear suspension
service and maintenance.
U 181T Snowmobile Maintenance and Repair II 2 cr. Offered
spring.Prereq., SET 180T. Principles and theory of snowmobile
electrical, fuel, front suspension, and brake systems.
U 182T Computer Applications for Motorsports Professionals
1 cr. Offered spring. Prereq., CRT 101. Use of recreational
power equipment software for parts retrieval, invoicing and payment
methods. Students build, query, and create reports using database
software, and create a business plan for a hypothetical dealership.
U 195T Special Topics 1-6 cr. (R-6) Offered intermittently.
Experimental offerings of visiting professors, experimental offerings
of new courses, or one-time offerings of current topics.
U 196T Independent Study Variable cr. (R-6) Offered
intermittently.
Truck Driving (TRK)
U 106T Commercial Driver’s License (CDL) Training
1 cr. Offered intermittently. Prereq., consent of instr.
Individual schedule. Truck safety, operation, and maintenance
review. Schedule and obtain Class A Commerical Driver’s
License (CDL).
Welding (WEL)
U 111T Welding 2 cr. Offered autumn and spring.
Basic and intermediate processes of shielded metal arc welding
(SMAW) and oxyacetylene welding are covered in flat, horizontal,
and vertical positions in a variety of joint configurations. Instruction
in the oxyacetylene cutting process.
U 139T Welding Maintenance and Repair 2 cr. Offered
spring. Prereq., MPR115T, WEL 111T. Combines the skills gained
in welding and machine shop for practical applications such as
repairing a broken cylinder block. Major emphasis is placed on
repair techniques. Common repair procedures using machine shop
and welding equipment is demonstrated.
U 180T Welding Metallurgy 4 cr. Offered autumn.
Covers the manufacturing of iron and steel. Examination of physical
and mechanical properties. Phase changes with the application
of heating and cooling cycles. Ferrous crystal types and properties.
Suggested welding procedures for low, medium, and high carbon
steels, alloy steels, and cast iron.
U 181T Shielded Metal Arc Welding (Plate) and Thermal
Cutting 4 cr. Offered autumn. Theory and safe operation
of shielded metal arc welding (SMAW) of carbon steel on plate
and structural components in all positions to industry standards.
Visual inspection and destructive testing used to determine acceptability
based upon industry standards (American Welding Society Structural
Welding Code-Steel). Power sources and electrodes are covered
in depth. Materials are prepared using mechanical plate shears
and thermal cutting techniques. Thermal cutting techniques are
examined relative to theory of operation and safe practices. Processes
used are oxy-fuel cutting, plasma arc cutting, and air carbon
arc cutting. Theory and operation of oxyacetylene welding examined..
U 182T Blueprint Reading and Development 3 cr. Offered
spring. Prereq., WEL 183T. Practical experience in reading and
drawing orthographic projections, interpreting dimensions, notes,
scales, and welding symbols. Isometric projection (pictorial),
sections, and auxiliary views with practical experience using
conventional drafting tools and computer aided drafting (CAD).
U 183T Layout Techniques 2 cr. Offered autumn.
Encompasses layout on material of various shapes using blueprints
and practical layout techniques on pipe and structural steel.
Use of contour markers and a review of geometric construction.
Computation of approximate costs is included.
U 184T OSHA Rules and Regulations 1 cr. Offered
spring. Study of the Occupational Safety and Health Administration
rules and regulations that affect the welding and construction
industries.
U 185T Flux Core Arc Welding 4 cr. Offered spring.
Theory, practice, and safe operation of flux core arc welding
equipment. Coupons are welded in the flat, horizontal, and vertical
positions to industry standards using a variety of welding electrodes,
diameters, and power sources, which prepare students for welding
qualification to the American Welding Society Structural Welding
Code specifications.
U 189T Metal Fabrication I 4 cr. Offered spring.
Prereq., MPR 114T; WEL 181T; coreq., WEL 182T, 185T. Conception,
design, and construction of a metal structure to industry standards
using shears, presses, and other machine tools common to the welding
industry. Skills are developed in the areas of shielded metal
arc welding and flux core arc welding, oxyacetylene cutting, plasma
arc cutting, and air carbon arc cutting.
U 195T Special Topics 1-6 cr. (R-6) Offered intermittently.
Experimental offerings of visiting professors, experimental offerings
of new courses, or one-time offerings of current topics.
U 196T Independent Study Variable cr. (R-6) Offered
intermittently.
U 280T Gas Tungsten Arc Welding 4 cr. Offered
autumn. The theory and safe operation of Gas Tungsten Arc Welding
(GTAW). Examination of power source controls and operation along
with associated consumables such as gasses, electrode filler materials
for carbon steel, stainless steel, and aluminum. Welding skill
development according to industry standards using these materials
in the flat, horizontal, and vertical positions.
U 281T Metal Fabrication II 4 cr. Offered spring.
Prereq., MPR 114T, MPR 214T; WEL 181T, 185T, 182T, 183T, 280T,
283T.Students combine all knowledge and skills developed in the
welding program to design and draw a full set of plans (blueprints)
for an instructor-approved project using extensive welding, metal
fabrication equipment, machining processes and automation. High
quality performance, consistent with business and industry required.
U 282T Pipe Welding-SMAW and GTAW 4 cr. Offered
autumn. Prereq., WEL 181T; coreq., WEL 280T. Emphasis on skill
development in the welding of pipe sections to extremely high
quality levels as required by national codes and standards. Pipe
welding using GTAW for the root pass and SMAW for the remaining
passes in all positions. Visual inspection and destructive testing
used to evaluate work according to industry standards.
U 283T Gas Metal Arc Welding 4 cr. Offered spring.
Prereq., WEL 185T. Theory and safe operation of Gas Metal Arc
Welding (GMAW). Theory of flux core arc welding applied to GMAW.
Primary focus on application, practical skill development, and
producing welds that meet industry standards. Metals welded are
low carbon steel, stainless steel, and aluminum. Short circuit
arc and spray arc transfer used. Examination of gas and electrode
selection.
U 285T Automation in Welding 3 cr. Offered spring.
Application of the welding process to automation. Examination
of simple automation techniques such as tools, clamping, and fixturing
to aid in the rapid joining of production runs. Increasing complexity
is examined leading into equipment that carries the welding gun,
tractors, and carriages by fully-automated systems with the student
performing set-up and troubleshooting (Submerged Arc Welding)
and automated parts processing (optical tracer torch). Programmable
controllers are investigated and used. The use of industrial robots
studied.
U 286T Welding Certification and Codes 2 cr.
Offered spring. Prereq., WEL 181T, 185T. Fundamental concepts
and requirements of the American Society of Mechanical Engineers
(ASME) and American Welding Society (AWS) are examined. Through
laboratory experience students are provided the opportunity to
qualify (certify) under the two codes mentioned above.